Wavecor WF166TU01 6-1/2″ Paper Cone Neodymium Mid-Woofer 4Ohm

Wavecor WF166TU01 6-1/2″ Paper Cone Neodymium Mid-Woofer 4Ohm Quick Overview:The Wavecor WF166TU01 is a 6-1/2″ paper cone midwoofer that is designed for demanding bass and midrange applications. This driver is powered by a dual neodymium magnet structure that ensures good efficiency. The WF166TU01 is an ideal choice for car audio applications. Product Highlights:Heat sink for increased heat transfer obtaining high long-term power handlingVented voice coil former for reduced distortion and compressionVented chassis for lower air flow speed reducing audible distortionHeavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level detailsLarge motor system with 1” voice coil diameter and dual neodymium magnet for better control and efficiencyLong linear stroke motor for reduced distortion at high levelsLinear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditionsGold plated terminals to prevent oxidation for long-term reliable connection – important in a car environment Product Description:The Wavecor WF166TU01 is a 6-1/2″ paper cone midwoofer that is designed for demanding bass and midrange applications. This driver is powered by a dual neodymium magnet structure that ensures good efficiency and optimized. The WF166TU01 is an ideal choice for car audio applications.The large 32mm voice coil and the special heat sink ensure high power handling – thermally and mechanically. The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of chassis and voice coil. The Wavecor WF166TU01 is an obvious choice for 2-way high-end car speaker systems. Product Specification:Nominal size6.5[inch.]Nominal impedance4[ohm]Recommended upper frequency limit3.5[kHz]Sensitivity, 2.83V/1m, (average 200-2,000Hz)91.5[dB]Voice coil diameter32.5[mm]Voice coil height11[mm]Air gap height4.0[mm]Voice coil resistance, RDC3.2[ohm]Voice coil inductance0.16[mH]Magnet weight (dual neodymium)102[g]Effective radiating area, Sd139[sq.cm]Power handling, continuous, IEC 268-560[W]Resonance freq., Fs50[Hz]Moving mass, incl. air12.5[g]Force factor, Bxl5.2[Tm]Mechanical Q, Qm11 –Electrical Q, Qe0.47 –Total Q, Qt0.45 –Suspension compliance, Cms0.85[mm/N]Equiv. air volume, Vas23.2[lit.]Total unit net weight0.71[kg]Wavecor WF166TU01 DATA SHEET